Micanan PRO-GH Owner's Manual download pdf (Page 5)

With door several feet from closed position, disable sensing edge

TEST SENSING EDGE TERMINATION:

connection to the Transmitter.

- (D5) "Edge Activation" (AMBER) LED will light for several seconds.

When edge is first pressed;

D7D8D5D6

- (D8) "Signal Acquired" (GREEN) LED will blink when edge is pressed.

Hold closed door control:

- 2 LED's under the label will be lit.

The unit will be in "Supervised Mode":

INITIAL POWER UP:

START UP / TESTING PROCEDURES

D6 GREEN

D5 AMBER

D8 GREEN

D7 RED CHECK BATTERY

SIGNAL ACQUIRED

EDGE ACTIVATION

NORMAL MODE

LED LEGEND-RECEIVER

TRANSMITTER

(ON BOTTOM BAR)

RECEIVER

(ON OPERATOR)

Constant pressure required on door CLOSE control

- (D3) "Transmitter Awake" (GREEN) LED will blink when edge is pressed.

Electrical Edge:

- Unplug quick disconnect plug connecting

Unit should switch to "Supervised Mode":

Constant pressure required on door CLOSE control.

LED LEGEND-TRANSMITTER

TRANSMITTER SENDINGGREEND3

Transmitter to Sensing Edge.

GAGR

4) Receiver will switch to "Normal Mode":

- (D6) "Normal Mode" (GREEN) LED will light.

Door now requires momentary contact for CLOSE control.

- (D7) "Check Battery" (RED) LED should not be lit.

- (D6) "Normal Mode" (GREEN) LED will turn off.

1 2 3 4 5 6 7 8 9 10 ... 16 17

No comments

Micanan PRO-GH Owner's Manual Page 5